PEX Repiping and Slab Leak Repairs in Lake Elsinore

A Repipe is a process where your existing piping in your house or a building are upgraded with new ones. All pipe fittings, supply lines and water valves are changed. this generally leads to even better water pressure and considerably better water quality.

Should I Repipe the house in Lake Elsinore?

There are many reasons for why a person might need to upgrade the piping of the home.

For residences with galvanized water pipes:

Galvanized water pipes are located in homes built during the 80’s. A galvanized pipe is an iron water pipe which is zinc coated to be protected from corrosion. Typically the zinc coating slowly and gradually wears away over time exposing the iron, then oxidation buildup.

Well-known Slab Leak Indicators:

Very Low Water Pressure – The key reason why could be the reduction of the water flow due to rust and corrosion build-up in the galvanized water pipe.

Rust Color Water – Corrosion normally goes into the water fixtures. This indicates an advanced stage of rust in your water pipes.

Leaking Pipes – Leaks are most commonly caused by corrosion of the galvanized iron pipes. Unknown leaking can develop in the walls, within the attic as well as beneath the home, creating the chances of severe damage to your home.

For houses with polybutylene water pipes:

This sort of plastic water line was widely used in the middle of the 70’s to the early 90’s. It had been viewed as the next technological improvement for water lines and water fixtures. Polybutylene piping systems had been installed in millions of houses before it was judged as highly faulty. Nearly 60% of all of the homes built in this time frame continues to have this variety of water pipe in the home.

Polybutylene pipes have a very brief lifespan, because chemical substances in common city water makes it firm up and become brittle. The fittings commonly break open first, followed by the water line itself.

Polybutylene plumbing systems are made up of flexible plastic pipe, grey when used inside and blue or black for outdoor usage. Some fittings are made with both metal and plastic. Insert fittings are used to join up pieces of polybutylene pipe.

For houses with copper plumbing situated in the slab.

Slab leaks are generated by copper or other pipes becoming corroded from certain soil and water conditions under the floor of the house.

Slab Leak Symptoms:

  • Water is leaking through your foundation.
  • Water sounds like it is running even when the faucets are turned off.
  • Water meter shows your water is running even if your water is turned off.
  • Uncommonly high monthly water costs.
  • Others who live nearby already have had a slab leak.
  • You experienced a previous slab leak.

Attributes of Copper Repiping

  • Raised water pressure
  • You can eliminate rust color or smelly water
  • Clean, clear water
  • Having the capacity to use several faucets at once
  • Higher quality plumbing with no more leaky water lines.
  • No burning while in the shower if someone else turns on your faucet or flushes.
  • Greater assurance because your piping system is secure and safe.
  • Favorable feature for your property.

If you employ a plumbing company or other organization to get the job done, it’s quite possibly going to set you back more in the long term if you consider that you’ll have to retain the services of a drywall repair provider to replacement patch over the many entry points. Whenever you employ the service of a repipe business which includes a master patcher on staff such as Repipe Specialists, you’ll never have to invest more money or valuable time in getting the home back to normal. From beginning to end, the PEX and Copper repiping process takes just a couple of days.